Friday, December 2

How To Clean Cooker Hood Motor In Just 5 Steps!

Cooker hood motor cleaning is not difficult, especially if you have the right guide to help you.

Here are some useful steps that will get your cooker hood motor clean in no time!

You’ll be back to enjoying your kitchen again and your guests won’t know it’s been cleaned! The air around you will always be free of grease and odor thanks to your sparkling cooker hood motor! Let’s get started!

 

Step 1: Turn off the power supply

The first step to cleaning your cooker hood motor is to turn off the power supply.

This will ensure that you don’t accidentally electrocute yourself while cleaning. Plus, it’s just good practice to avoid working with electrical appliances when they’re turned on.

 

 Turn the stove knob to OFF and then flip the breaker or unplug from the outlet. Next, get a dry towel and cover any nearby work surfaces in case of any spills or accidents 

 

Lightly spray a clean rag with WD-40 and wipe down your cooktop. You can also use cooking oil for this part if you have some handy!

 

Step 2: Unplug the hood

Unplug the hood from the power outlet. This is important because you don’t want to accidentally electrocute yourself while cleaning the motor.

 

Step 3: Remove the fan blades (three sentences): Use a screwdriver to remove the screws that hold the fan blades in place. Once the blades are removed, you will be able to access the motor.

 

Step 4: Clean the motor (four sentences): Use a damp cloth to wipe down the outside of the motor.

 

Step 3: Remove all panels from above, below and side of your cooker hood

It’s important to clean all the nooks and crannies of your cooker hood, so be sure to remove all panels. This will give you access to the motor,

 

 which is usually located on the underside of the hood. Carefully use a vacuum cleaner or hand brush to remove any dust bunnies from this area. If there are any visible stains that are not being removed by these methods, try soaking them in warm water before removing with a soft cloth.

Make sure you dry off the area completely before reassembling the panels back into place and plugging it back in.

 

Step 4: Disassemble all panels

The first step is to disassemble all of the panels on your cooker hood. This will give you access to the motor so that you can clean it properly. Be sure to label each panel as you remove it so that you can put them back in the correct order later. 

 

Next, detach any wires from the motor and unscrew the fan from the underside of the vent grill. It’s important to be careful when doing this because a blade is hidden beneath the grill and could cause injury if mishandled. 

 

Now, carefully use a vacuum cleaner with a hose attachment to suck up any loose dust from inside the cooker hood and around its base before starting to wash it with soap and water.

 

Step 5: Vacuum up all dust from inside sections, and wash them with dish soap

Over time, your cooker hood motor can become caked with dust and grease. 

 

This not only looks bad, but can also impact the performance of your hood. Luckily, cleaning your cooker hood motor is a quick and easy process that only takes a few minutes. Follow these simple steps and you’ll have a clean motor in no time! 

 

1) Empty all contents from the appliance.

 2) Vacuum up any excess dust from inside sections (use a vacuum hose if possible).

 3) Fill a large bowl or pot with warm water and dish soap, then place it on top of the appliance. 4) Use an old toothbrush to scrub away any dirt/grease, making sure to work on stubborn areas for at least three minutes each spot.

 

Conclusion

Keeping your cooker hood motor clean is important for both the efficiency of your hood and the safety of your kitchen.

 

 Luckily, it’s easy to do with just a few simple steps. So next time you’re in the kitchen, take a few minutes to clean your cooker hood motor and keep your kitchen running smoothly. You’ll be glad you did!